ReciLabel β€Ί Guides β€Ί Net quantity

How to declare net quantity of contents

The net quantity statement is the shortest line on the label and the one most often written from habit: "12 oz", "1 lb", "net weight 360g". It is also one of the five things every packaged food label must carry, and the regulation that governs it β€” 21 CFR 101.7 β€” is specific about all four things producers tend to improvise: which units, which order, where on the panel, and how large the type must be.

1. The rule, in one paragraph

The principal display panel of a food in package form must bear a declaration of the net quantity of contents β€” 21 CFR 101.7(a). It is expressed in weight, measure, numerical count, or a combination of count and weight or measure. Liquid foods are declared in fluid measure; solid, semisolid or viscous foods, and mixtures of solid and liquid, are declared in weight; fresh fruit, fresh vegetables and other dry commodities customarily sold by dry measure may use dry measure. There is one escape hatch: if there is a firmly established general consumer usage and trade custom of declaring a liquid by weight (or a solid by fluid measure), that custom may be used.

The declaration must accurately state the quantity in the package, exclusive of wrappers and other material packed with it β€” 101.7(g). Reasonable variations caused by loss or gain of moisture in good distribution practice, or by unavoidable deviations in good manufacturing practice, are recognised β€” 101.7(q) β€” but the variation must not be unreasonably large. Weighing the box with the product in it is not a rounding choice; it is the wrong number.

2. Both units: ounces and grams

This is the point most small producers get wrong, because the regulation they read and the law that actually requires it are in two different places.

21 CFR 101.7(p) says a metric statement "may also appear" on the principal display panel β€” permissive language. The mandatory part comes from the Fair Packaging and Labeling Act as amended in 1992 (P.L. 102-329), which FDA's Food Labeling Guide Β§5 Q3 states plainly: "Food labels printed must show the net contents in both metric (grams, kilograms, milliliters, liters) and U.S. Customary System (ounces, pounds, fluid ounces) terms. The metric statement may be placed either before or after the U.S. Customary statement, or above or below it."

In practice, then, a compliant declaration always carries both:

Only the abbreviations in 101.7(n) may be used β€” weight wt, ounce oz, pound lb, gallon gal, pint pt, quart qt, fluid fl β€” with periods and plural forms optional. And no qualifying term that tends to exaggerate the amount may appear anywhere in the declaration β€” 101.7(f): "jumbo quart" and "full gallon" are the regulation's own examples of what not to write.

3. Which form the number takes

Under 4 pounds or 1 gallon β€” 101.7(j)(1). The declaration is expressed in ounces first, with identification by weight or liquid measure, and β€” if 1 pound or 1 pint or more β€” followed in parentheses by the declaration in pounds (with any remainder in ounces or fractions of a pound) or, for liquids, in the largest whole units with any remainder in fluid ounces. The regulation's examples, 101.7(m)(1)–(4):

QuantityCorrect declaration
1Β½ lb"Net Wt. 24 oz (1 lb 8 oz)", "Net Wt. 24 oz (1Β½ lb)" or "Net Wt. 24 oz (1.5 lb)"
ΒΎ lb"Net Wt. 12 oz"
1 qt liquid"Net 32 fl oz (1 qt)"
1ΒΎ qt liquid"Net contents 56 fluid ounces (1 quart 1Β½ pints)" or "Net 56 fluid oz (1 qt 1 pt 8 oz)" β€” not "1 quart 24 ounces"

4 pounds or 1 gallon or more β€” 101.7(k). The declaration is expressed in pounds (with any remainder in ounces or fractions of a pound) or, for liquids, in the largest whole unit with any remainder in fluid ounces or fractions of the pint or quart. Example, 101.7(m)(6): 2Β½ gallons is "Net contents 2Β½ gallons", "Net contents 2.5 gallons" or "Net contents 2 gallons 2 quarts" β€” not "2 gallons 4 pints".

Count alone is not enough β€” 101.7(c). When a declaration by numerical count does not give adequate information about the quantity of food in the package, it must be combined with the weight, measure or size of the individual units. "12 cookies" tells the buyer nothing about how much cookie that is; "12 cookies β€” Net Wt. 12.7 oz (360 g)" does.

Random-weight packages β€” 101.7(j)(2). A package from a lot of varying weights with no fixed weight pattern may, when the net weight exceeds 1 pound, be expressed in pounds and decimal fractions of the pound to not more than two decimal places; at or under 1 pound it may use decimal fractions of the pound instead of ounces. Example, 101.7(m)(5): ΒΎ lb on a random package may be "Net Wt. .75 lb".

Fractions and decimals β€” 101.7(d). A common fraction must be in halves, quarters, eighths, sixteenths or thirty-seconds (unless a firmly established trade custom uses different fractions for that commodity), reduced to its lowest terms. A decimal fraction must not be carried out to more than two places.

4. Worked examples from real products

Shortbread, bag of 12. The builder's sample recipe is flour 180 g, butter 120 g, sugar 60 g β€” a 360 g batch, 12 cookies of 30 g. 360 Γ· 28.35 = 12.70 oz, so the bag is declared:

Net Wt. 12.7 oz (360 g)

Under 4 lb, so ounces first β€” 101.7(j)(1) β€” with the metric equivalent alongside it, per the FPLA dual-declaration rule in Β§2.

Shortbread, single cookie. One cookie is 30 g. 30 Γ· 28.35 = 1.06 oz, so a singly wrapped cookie is declared:

Net Wt. 1.06 oz (30 g)

The decimal is carried to two places, the maximum 101.7(d) allows.

Granola, 600 g bag. The serving-size guide's granola batch is 600 g. 600 Γ· 28.35 = 21.16 oz; 21.16 oz is 1 lb 5.16 oz, so the bag is declared:

Net Wt. 21.16 oz (1 lb 5.16 oz) 600 g

Same rule, same arithmetic β€” ounces first because the package is under 4 lb, pounds in parentheses because it is over 1 lb, metric alongside.

5. Where it sits, and how large it must be

Placement β€” 101.7(e) and (f). The declaration is on the principal display panel (duplicated on each principal panel if the package has alternate ones), as a distinct item, in lines generally parallel to the base on which the package rests as displayed β€” and within the bottom 30 percent of the area of the label panel. The exception: on a principal display panel of 5 square inches or less, the bottom-30-percent requirement does not apply, provided the declaration meets the other requirements. It must be separated from other printed information above or below by at least a space equal to the height of the lettering used, and from information to the left or right by at least twice the width of the letter "N" in the type used.

Type β€” 101.7(h) and (i). Boldface print or type, in distinct contrast to other matter on the package. The ratio of letter height to width must not exceed 3 to 1. Minimum heights, keyed to the area of the principal display panel:

Principal display panel areaMinimum letter height
5 sq in or less1/16 in
More than 5, up to 25 sq in1/8 in
More than 25, up to 100 sq in3/16 in
More than 100 sq in1/4 in
More than 400 sq in1/2 in

Letter heights are measured on capitals; where upper and lower case are used, the lower-case "o" must meet the minimum. Where fractions are used, each component numeral must meet one-half the minimum height. Where the declaration is blown, embossed or moulded on glass or plastic rather than printed, each size above is increased by 1/16 in.

6. Multiunit retail packages β€” 101.7(s)

On a multiunit retail package β€” two or more individually packaged units of the identical commodity in the same quantity, intended to be sold as part of the package but capable of being individually sold in full compliance β€” the outside of the package must state the number of individual units, the quantity of each individual unit, and, in parentheses, the total quantity of contents in avoirdupois or fluid ounces. The regulation's examples:

"6-16 oz bottlesβ€”(96 fl oz)" and "3-16 oz cansβ€”(net wt. 48 oz)"

The total-quantity parenthetical need not be followed by an additional parenthetical in the largest whole units, as paragraph (j)(1) would otherwise require. Open multiunit packages that do not obscure the number of units or prevent examination of each unit's labeling are exempt from this paragraph if each unit's labeling complies with (f) and (i).

7. Five ways this goes wrong

#MistakeWhat it costs you
1Declaring ounces only, no gramsFails the FPLA dual-declaration requirement β€” the most common flag on a first label review
2Weighing the packaging with the productThe declaration must be exclusive of wrappers β€” 101.7(g)
3Putting the net weight at the top of the panelIt belongs in the bottom 30% of the principal display panel β€” 101.7(f)
4"12 cookies" with no weightCount alone does not give adequate information β€” 101.7(c)
5Type smaller than the panel area allowsMinimum heights are set by panel area β€” 101.7(i); 1/16 in is only for panels of 5 sq in or less

8. What this guide does not cover

USDA-regulated meat, poultry and egg products follow 9 CFR 317.2 and 381.121, not this section β€” and FSIS rescinded its own dual-declaration requirement for those products in 2022, so the both-units rule in Β§2 does not apply to them in the same way. Drained weight, and the fill-of-container standards in 21 CFR 130.14, are separate requirements. This guide is about FDA-regulated packaged foods sold at retail.

Build the panel once the net weight is settled

Search your ingredients, set the amounts, set the serving size and the number of servings β€” and the panel recomputes live. Free to start; nothing you type leaves your browser.

Build my label β€” free Pro Β· $19 once